Need a quick quote response?
0086-022-58055273

Hex Head Screw Manufactory

Hex head screw is a kind of screw that is widely used on the surface of building materials, so it is also called roofing screw.

In general, Hex head screw is divided into two types, one is Hex head Self Tapping screw (also called tek screw), which is characterized by self-tapping points. It can easily drill into the surface of building materials, mainly used for the connection and fixing of some thinner plates, such as the connection between color steel plates and color steel plates, the connection between color steel plates and purlins, wall beams, etc., and its penetration capacity generally does not exceed 6mm , the maximum does not exceed 12mm. Therefore, it is often used for the combination between the roof surface of color steel plate and the wooden structure of the house.

The other is the more commonly used roofing screw, the Hex head Self Drilling screw. With the Self Drilling point, it can enter the interior of harder and thicker metals. It is mainly used for fixing color steel tiles (a kind of color steel plate) of steel structures and can also be used for fixing thin plates of simple buildings.

The hex head cap screw is often equipped with a washer. The washer can not only increase the contact area, reduce the pressure, protect parts and screws, but most importantly, it can upgrade the waterproof ability of the hex washer head screw. The washer isolates the water, making the screw and the inside of the material less prone to rust due to water ingress.

Why Choose Lituo Hex Head Screw ?

As a Hex head screw manufacturer with 20 years of experience, Lituo has leading technology and rich production experience in the production of Hex head screw.

High-Strength Material

Our Hex Head Screws are made from high-strength steel, which provides superior strength and durability compared to other materials. This makes them ideal for heavy-duty applications that require a secure and reliable fastening solution.

Easy to Install

Our Hex Head Screws feature a hexagonal head design that provides excellent grip and torque, making them easy to install and remove with a standard hex wrench. This saves time and effort during installation and reduces the risk of stripping or damaging the screw.

Wide Range of Applications

Our Hex Head Screws are suitable for a wide range of applications, from construction and manufacturing to automotive and electronics. With a variety of sizes and finishes available, you can choose the perfect Hex Head Screws to meet your specific needs.

FAQ

To remove a hex head screw from a gutter, you will need a hex head screwdriver or wrench that fits the size of the screw. If the screw is rusted or corroded, you may need to apply some penetrating oil or rust remover to help loosen it. Place the screwdriver or wrench on the hex head of the screw, and turn it counterclockwise to loosen it. If the screw is still difficult to remove, you can tap it lightly with a hammer to help break any rust or corrosion.

A hex head screw is a type of fastener that has a six-sided head, shaped like a hexagon. It is typically used with a matching hex head driver or wrench to tighten or loosen the screw. Hex head screws are commonly used in construction, woodworking, and automotive applications.

If you have a stripped button head screw with a hex head, you can try using a pair of pliers or vice grips to turn the screw. Grip the head of the screw firmly with the pliers or vice grips, and turn it counterclockwise to loosen it. If the screw is still difficult to remove, you can try using a screw extractor tool. This tool is designed to grip onto the stripped screw and turn it counterclockwise, allowing you to remove it.

To get a stripped hex head screw out, you can try using a screw extractor tool. This tool is designed to grip onto the stripped screw and turn it counterclockwise, allowing you to remove it. If a screw extractor tool is not available, you can try using a rubber band or a piece of steel wool. Place the rubber band or steel wool over the stripped hex head, and use a hex head screwdriver or wrench to turn it counterclockwise. The rubber band or steel wool can help provide extra grip and traction to help loosen the screw. If the screw is still difficult to remove, you may need to drill a small hole into the center of the screw and use a screw extractor tool to remove it.

The terms “cap screw” and “hex head bolt” are often used interchangeably, but there is a technical difference between them. Cap screws are typically fully threaded screws that are used to fasten machine parts and equipment. Hex head bolts, on the other hand, are partially threaded and used with a nut to secure two or more objects together.

The head diameter of a 1/4 inch hex head screw varies depending on the specific screw, but a general rule of thumb is that the head diameter is approximately twice the diameter of the screw shank. Therefore, the head diameter of a 1/4 inch hex head screw is typically around 1/2 inch.

One common method to remove a stripped hex head screw is to use a screw extractor, which is a specialized tool designed to grip and turn the screw. Another method is to try gripping the head of the screw with a pair of pliers and turning it counterclockwise. If neither of these methods work, you may need to drill out the screw and then re-tap the hole.

A hex bit, also known as an Allen bit, is used to drive hex head screws. Hex bits are available in a range of sizes to fit different hex head screw sizes.

A type 1 grade 5 hex head cap screw is a specific type of cap screw that is made from medium carbon steel and has been heat treated to achieve a minimum tensile strength of 120,000 psi. The hex head cap screw is typically used in high-stress applications and is designed to be used with a nut or tapped hole.

To remove a hex head screw, you will need a suitable hex bit or Allen wrench that fits the size of the screw. Insert the hex bit or Allen wrench into the head of the screw and turn it counterclockwise to loosen the screw. If the screw is stuck or stripped, you may need to use a screw extractor or other specialized tool to remove it.

Roofing screws should be placed at the high point of each rib or wave of the metal roofing panels. They should be evenly spaced, with the recommended spacing specified by the manufacturer of the roofing panels.

To screw down metal roofing, start at one end of the roof and work your way to the other end, placing screws at the high point of each rib or wave. Use a drill with a screwdriver bit to drive the screws in, taking care not to over-tighten them.

Roofing screws should be placed at the high point of each rib or wave of the metal roofing panels, spaced evenly according to the manufacturer’s recommendations.

To repair screw holes in a metal roof, first remove the damaged screw and any surrounding rust or corrosion. Then, clean the area with a wire brush and apply a rust inhibitor. Finally, seal the hole with a metal roof repair sealant, and install a new screw in a different location.

Roofing screws should be placed at the high point of each rib or wave of the metal roofing panels, spaced evenly according to the manufacturer’s recommendations.

To seal screw holes in a metal roof, first remove the damaged screw and any surrounding rust or corrosion. Then, clean the area with a wire brush and apply a rust inhibitor. Finally, seal the hole with a metal roof repair sealant, and install a new screw in a different location.

The spacing between screws in metal roofing depends on the type of panel being used and the manufacturer’s recommendations. As a general guideline, screws should be spaced no more than 24 inches apart.

To screw metal roofing, start at one end of the roof and work your way to the other end, placing screws at the high point of each rib or wave. Use a drill with a screwdriver bit to drive the screws in, taking care not to over-tighten them.

For a plywood roof, use galvanized or stainless steel screws that are at least 1-1/2 inches long. The screws should have a large, flat head to prevent them from pulling through the plywood.

For a warm roof, use insulation screws with a metal or plastic cap to attach the insulation to the roof deck. These screws should be at least 1-1/2 inches long and spaced according to the manufacturer’s recommendations.

It is generally recommended to use screws rather than nails to attach sarking to a shed roof. This is because screws provide a more secure attachment and are less likely to work loose over time.

For a warm roof with OSB boards, use insulation screws with a metal or plastic cap that are at least 200mm long. These screws should be spaced according to the manufacturer’s recommendations.

Roof tiles are typically not screwed down, but rather attached using specialized roofing nails or clips. Screws may be used in certain situations, such as for securing ridge tiles or for attaching roofing underlayment.

For a shed roof, use galvanized or stainless steel screws that are at least 1-1/2 inches long